A 30A relay controller with RFID authentication, automatic load-completion detection, and full session data logging. Engineered for EV charging bays, industrial access points, and managed power distribution.
FOR EV Charger Manufacturers · EV OEMs · Fleet Operators · EV Infra Companies
Built for organisations manufacturing, deploying and operating EV charging infrastructure.
Integrate RFID authentication, logging and access control into chargers.
Controlled charging solutions for customers, dealers and fleets.
Monitor charging sessions and energy usage.
User authentication, logging and billing integrations.
Managed charging deployments for commercial projects.
Prevent unauthorised charging and maintain records.
Every feature engineered for reliability in EV charging stations, factory floors, and managed access infrastructure.
Relay activates on authenticated RFID tap and deactivates on second tap. Supports up to 10 registered cards per device at 13.56 MHz, no app required.
Automatically cuts relay power when load current drops to ≤ 0.6 A, indicating charge completion or load removal. Threshold is configurable via firmware.
Charging session seamlessly resumes after any power interruption. No need for the user to re-tap the card, zero downtime for fleet operators.
Distinct audible tones for session Start, Stop, and Wrong / Unregistered Card, clear operator feedback even without a display module attached.
Every session records energy (kWh), live current, voltage, start/end timestamps, and card UID. Exportable via app, BLE, or cloud API.
Under-voltage, over-voltage, over-current, and earth-fault protection built into every unit, an industrial-grade safety stack.
Tap a card to start a simulated charging session. Current ramps up, tapers as the battery fills, and the relay cuts the moment it crosses your threshold. Drag the slider to change it, just like the configurable firmware setting.
Relay power is automatically cut when output current drops to a low or zero level, indicating charge completion or absence of load. Default threshold ≈ 0.6 A, configurable via firmware or companion app. Try it live in the demo above.
Full telemetry per session, from RFID authentication to relay deactivation, ready for billing integrations and fleet dashboards.
Total kWh from real-time current & duration
Continuous amperage log throughout session
Input voltage at regular session intervals
RFID auth timestamp + card UID stored
Relay deactivation, tap-off or auto-shutoff
BLE · Wi-Fi · Cloud Integration
📡 API-first architecture: all session records accessible via BLE, companion app, or cloud API. Compatible with fleet management, billing systems, and Battery Management Systems (BMS).
Non-app setup or cloud-based remote monitoring and OTA firmware updates. Ideal for fleet operators managing multiple units across a site.
App-direct connection for local config, card management, and session data retrieval, no internet dependency required for on-site access.
NOTE: Wi-Fi and BLE are both onboard, one active at a time.
Modular hardware add-ons let you configure the ATP-30A-01 for fleet portals, kiosk deployments, or fully offline setups.
LCD or OLED for on-device session status, live current, voltage readings, and diagnostics, via I2C bus.
Cellular connectivity for remote monitoring, alerts, and cloud data push, independent of local Wi-Fi.
Physical keypad for unit allocation, PIN-based access control, or admin configuration without a phone.
Proprietary API over BLE or Wi-Fi, compatible with fleet, billing, or Battery Management Systems (BMS).
Everything you need to know before deploying the ATP-30A-01 in your EV charging infrastructure.
Contact us for bulk pricing, custom API integration support, or to request an evaluation unit.
REQUEST EVALUATION UNIT